Go to Otherpower.com Home Page Go to Forcefield Shopping Cart Go to Wondermagnet.com Home Page
Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products
Here are the plans to make PVC Pipe Props | 31 comments (31 topical, editorial)
Re: Here are the plans to make PVC Pipe Props (none / 0) (#4)
by wooferhound (tim((NoSpamAt))wooferhound.com) on Tue Nov 11th, 2003 at 09:06:38 PM MST
(User Info) http://wooferhound.com

 I'm thinking that you would need to bend some Fender Washers to fit the curve on the pipe and have 1 or 2 bent washers on each side of the pipe and the bolt going through it all.


}=- W o o f -={


Here are the plans to make PVC Pipe Props | 31 comments (31 topical, 0 editorial)

Menu
· create account
· How to use the board
· FAQs
· search the board
· Google search the board
· Old Otherpower Board

Login
Make a new account
Username:
Password:

Powered by Scoop
You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!