Go to Otherpower.com Home Page Go to Forcefield Shopping Cart Go to Wondermagnet.com Home Page
Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products
Electronic Stirling | 20 comments (20 topical, editorial)
Re: Electronic Stirling (3.00 / 0) (#20)
by joedupont (joedupont@juno.com) on Thu Feb 15th, 2007 at 03:27:06 PM MST
(User Info)

WHY NOT USE THE PELTIER UNITS TO TAKE WASTE HEAT FROM THE STIRLING ENGINE AND RUN A FAN TO COOL THE STIRLING ENGINE AND ITS SELF . IN THAT WAY ONE WOULD HAVE TO PICK UP
EFFICIENCY.. IF THE PELTIERS COULD HELP RUN THE DISPLACER WITHOUT SEALS ALL THE BETTER. SUCH A HYPRID  STIRLING ENGINE MIGHT BE WORTH LOOKING INTO..
HAS ANYONE SEEN THE ROTARY DISPLACERS  .. NO UP AND DOWN.. JUST A ROTARY DISPLACER SWEEPING THE AIR ON THE OPEN SIDE.

MAYBE PELTIERS COULD OPERATE ELECTRONIC STIRRERS..INSTEAD OF DISPLACER.
IF THE MOTORS ARE ALTERNATING STIRRING THE  AIR IN THE  THE HOT AND COLD SECTION OF THE DISPLACERS THEN YOU ARE NOT MOVING A MASSIVE UNIT.  JUST A THOUGHT.
THE ELECTRONICS YOU GUYS SEEM TO HAVE A HANDLE ON.
PERHAPS TWO LOOPS WITH  A SPACE IN COMMON.   HUMM.
Our mission is to keep ourselves entertained with knowledge and learning through creativity. As long as we can create as long as we breath with out the governm
[ Parent ]



Electronic Stirling | 20 comments (20 topical, 0 editorial)

Menu
· create account
· How to use the board
· FAQs
· search the board
· Google search the board
· Old Otherpower Board

Login
Make a new account
Username:
Password:

Powered by Scoop
You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!