the Otherpower.com Discussion Board || Comments 1 foot CNC wood blade for a 3 blade 2 foot prop

Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products

1 foot CNC wood blade for a 3 blade 2 foot prop | 20 comments (20 topical, 0 editorial)

Re: 1 foot CNC wood blade for a 3 blade 2 foot pro (3.00 / 0) (#17)
by RatOmeter on Wed Feb 23rd, 2005 at 11:36:13 AM MST
(User Info) http://www.rato.us

"I have a bunch of small NEMA 17 stepper motors..."

If I've identified your ebay ID properly, you've got whole shipload of stepper motors. I like stepper motors, but I kinda thought 256 of them is a few more than I could use.

Re: 1 foot CNC wood blade for a 3 blade 2 foot pro (3.00 / 0) (#19)
by richhagen (richhagen (a t) Juno.com) on Thu Feb 24th, 2005 at 02:07:06 AM MST
(User Info)

You are right on the money on the ID. They were cheap enough, and I had an idea for them at the time. Rich Hagen
'A Joule saved is a Joule made'
[ Parent ]

1 foot CNC wood blade for a 3 blade 2 foot prop | 20 comments (20 topical, 0 editorial)

Menu

· create account
· How to use the board
· FAQs
· search the board
· Google search the board
· Old Otherpower Board

Login

Make a new account

Username:

Password:

You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!