the Otherpower.com Discussion Board || Comments Paper on cogging in small turbines

Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products

Paper on cogging in small turbines | 4 comments (4 topical, editorial)

Re: Paper on cogging in small turbines (3.00 / 0) (#2)
by ghurd on Thu Mar 3rd, 2005 at 07:46:32 AM MST
(User Info)

I must be learning something. I understand most of the paper. Not so much the charts on the first read. And I like charts. Maybe it does show the perfect combination of decogging measures for best output, for someone with a better grasp of the situation. (I just did what Zubbly told me to do. Thanks Zubbly)

In the Conclusions section, most of it has a familiar sound.
Pole shape- Like decogging a F&P?
Pole arc to pitch ratio- Like Zubbly and others explained?
Skewing- Well, skewing!
Skewing is hard- I didn't think so.

G-

Re: Paper on cogging in small turbines (3.00 / 0) (#3)
by richhagen (richhagen (a t) Juno.com) on Thu Mar 3rd, 2005 at 04:03:07 PM MST
(User Info)

I thought it was funny that they concluded that skewing was more expensive to implement into a design as well. Rich
'A Joule saved is a Joule made'
[ Parent ]

Re: Paper on cogging in small turbines (3.00 / 0) (#4)
by ghurd on Thu Mar 3rd, 2005 at 04:26:09 PM MST
(User Info)

I recently overly turned down an induction rotor. It fell apart (knew it would, just not so soon).
Closer looking showed that really is a pretty complicated device.
I too can't believe skewing a magnet would be expensive compared to the regular old rotor manufacturing.
Maybe a twisted and curved magnet is too expensive, but I thought neo's could be sintered, and I thought sintering was cheap. I don't know....
G-

[ Parent ]

Paper on cogging in small turbines | 4 comments (4 topical, 0 editorial)

Menu

· create account
· How to use the board
· FAQs
· search the board
· Google search the board
· Old Otherpower Board

Login

Make a new account

Username:

Password:

You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!