the Otherpower.com Discussion Board || Comments SW-403 mods underway.

Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products

SW-403 mods underway. | 4 comments (4 topical, editorial)

Re: SW-403 mods underway. (3.00 / 0) (#3)
by swmiwindnsolar on Mon Dec 18th, 2006 at 12:40:11 PM MST
(User Info)

Hello Jerry.

Yes, please keep us posted on your observations on your Jerry blades on the Air-X.
I have seen many used Air-X's for sale on E-Bay due to noise and low performance.
Perhaps these modifications will make the Air-X a viable low wattage type genny.
I have a 48 volt UPS battery bank that is on float with grid power and would love to have a decent low wattage wind turbine for battery bank float use.

Thanks, Art.
Lawrence, MI.
swmiwindnsolar

Re: SW-403 mods underway. (3.00 / 0) (#4)
by Jerry on Mon Dec 18th, 2006 at 10:25:15 PM MST
(User Info) http://www.dplusv.com/Photo-03.html

Hi Lawrence.

My 403 is a 48 volt unit. Because my blades are desinged for much more tourque and lower rpm I will now be useing this 48 volt genny for 24 volt charging.

Its worthless at 48 volts. However if I use it with the original blades it will act as though it is just shorted out. My blades will have enough tourque to overcome this sudo short condition.

JK TAS Jerry

Airheads Page

[ Parent ]

SW-403 mods underway. | 4 comments (4 topical, 0 editorial)

Menu

· create account
· How to use the board
· FAQs
· search the board
· Google search the board
· Old Otherpower Board

Login

Make a new account

Username:

Password:

You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!