the Otherpower.com Discussion Board || Comments 4" rotor for the Mini 3 Phase Alternator

Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products

4" rotor for the Mini 3 Phase Alternator | 11 comments (11 topical, editorial)

Re: mini mill (3.00 / 0) (#3)
by swmiwindnsolar on Thu Jan 25th, 2007 at 09:07:09 AM MST
(User Info)

Hello Jerry.

Is that an operational mill?
Has it flown on a tower?

Thanks, Art.
swmiwindnsolar
[ Parent ]

Re: mini mill (3.00 / 0) (#4)
by Jerry on Thu Jan 25th, 2007 at 09:21:39 AM MST
(User Info) http://www.dplusv.com/Photo-03.html

Hi Art.

No it was just for her science fair. Although I did take it to the beach. I set it on a large rock. People were quite facinated with it. It has some LEDs the respond to each phase and one large red LED for all 3 phases. Quite a light show.

I've thought of flying it. Just never figured a good use for the small machine?

JK TAS Jerry

Airheads Page

[ Parent ]

Re: right picture I hope? (3.00 / 0) (#7)
by Jerry on Thu Jan 25th, 2007 at 10:35:55 PM MST
(User Info) http://www.dplusv.com/Photo-03.html

Whoops sorry, that last picture was the wrong one. I'll try that again.

JK TAS Jerry

Airheads Page

[ Parent ]

4" rotor for the Mini 3 Phase Alternator | 11 comments (11 topical, 0 editorial)

Menu

· create account
· How to use the board
· FAQs
· search the board
· Google search the board
· Old Otherpower Board

Login

Make a new account

Username:

Password:

You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!