the Otherpower.com Discussion Board || Comments Coil Smaller than magnet?

Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products

Coil Smaller than magnet? | 10 comments (10 topical, editorial)

Re: Coil Smaller than magnet? (3.00 / 0) (#9)
by jzeveney on Fri Apr 18th, 2008 at 10:13:21 AM MST
(User Info)

Thanks guys for all the feed back! As I mentioned the cog question was a result of my reading, learning, and attempting to understand b4 I construct. I now understand cogging is not an issue for this design and I'll be going with a standard 3 phase build. Also someone asked for a link to what I'm building. Here it is http://www.otherpower.com/trips1.html

Thanks,
Again.

I'll certainly share the experience as the build progresses. I turned the rotors and cut a grove for the magnets to rest against last night. Now that I don't have to worry about cogging I'll build the coils tonight. With some luck I be able to test drive the generator on my lathe next weekend. I post wave forms and voltages then.

[ Parent ]

Coil Smaller than magnet? | 10 comments (10 topical, 0 editorial)

Menu

· create account
· How to use the board
· FAQs
· search the board
· Google search the board
· Old Otherpower Board

Login

Make a new account

Username:

Password:

You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!