Go to Otherpower.com Home Page Go to Forcefield Shopping Cart Go to Wondermagnet.com Home Page
Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products
Vinyl ester resin casting lessons | 12 comments (12 topical, editorial)
Re: Vinyl ester resin casting lessons (3.00 / 0) (#4)
by jaskiainen (jaskiainen74inhottestmailcompany) on Thu May 1st, 2008 at 02:13:38 AM MST
(User Info)

Hi all!

I've seen the trouble of getting stator out of mold here many times.
My suggestion is to coat the mold first with teflon tape.
It worked great on my first stator.
The teflon tape is often used with surfaces that shouldn't stick with
the resin when repairing or making stuff of glassfiber.

Just a thought...

Best regards jaskiainen



Vinyl ester resin casting lessons | 12 comments (12 topical, 0 editorial)

Menu
· create account
· How to use the board
· FAQs
· search the board
· Google search the board
· Old Otherpower Board

Login
Make a new account
Username:
Password:

Powered by Scoop
You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!