the Otherpower.com Discussion Board || Comments Willing to help in my fab shop

Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products

Willing to help in my fab shop | 20 comments (20 topical, editorial)

Re: Willing to help in my fab shop (3.00 / 0) (#18)
by Tritium on Wed Apr 9th, 2008 at 10:42:51 AM MST
(User Info)

Don
I could certainly use a set of 1/2" or 5/8" thick, 24" diameter disk made for a 5 stud wheel hub (5 1/2") centers. What would that cost made and shipped to zip 79370?

Thurmond

[ Parent ]

Re: Willing to help in my fab shop (3.00 / 0) (#19)
by Ideal Fabrications on Wed Apr 9th, 2008 at 11:56:50 AM MST
(User Info)

Hello Thurmond,

I did some checking, but I don't know if it will meet your needs. I would be more than happy to make the 24" disk at no charge, but the material for 12" plate would be about $125.00(that's my cost) and the 58" plate would be about $145.00.

The shipping would be about $146.00 from my place (54115) to yours (79370). I can supply the pallet at no charge since I have some I don't need. I wish I could help you out. I have no problem making the things people might need to build there machines at no cost , but I can't afford to supply the matirial or shipping.

Wish you were closer, I looked at you photo's and really like your design. I you want to contact me you can either email me at don@idealfabrications.com or our shop number is (920)339-6340.

Take care,
Don Simons

[ Parent ]

Willing to help in my fab shop | 20 comments (20 topical, 0 editorial)

Menu

· create account
· How to use the board
· FAQs
· search the board
· Google search the board
· Old Otherpower Board

Login

Make a new account

Username:

Password:

You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!