the Otherpower.com Discussion Board || Comments Willing to help in my fab shop

Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products

Willing to help in my fab shop | 20 comments (20 topical, editorial)

Re: Willing to help in my fab shop (3.00 / 0) (#7)
by finnsawyer on Mon Apr 7th, 2008 at 09:20:46 AM MST
(User Info)

In other words, I have to provide the plate. You have no way to do any milling, then? Thanks for the response. As I said, I've marked this post.
GeoM
[ Parent ]

Re: Willing to help in my fab shop (3.00 / 0) (#8)
by Ideal Fabrications on Mon Apr 7th, 2008 at 10:12:35 AM MST
(User Info)

Yes, you would have to either provide the plate, or I can provide it for cost. I can't provide the materials for free cause well, I think thats easy to figure out...

I can only swing 18" on my lathe, but a friend of mine has a small machine shop less than 2 miles from me and we trade favors back and forth all the time. If you want, e-mail me at don@idealfabrications.com and I'll send you a phone number you can reach me at.

Take Care,
Don Simons

[ Parent ]

Willing to help in my fab shop | 20 comments (20 topical, 0 editorial)

Menu

· create account
· How to use the board
· FAQs
· search the board
· Google search the board
· Old Otherpower Board

Login

Make a new account

Username:

Password:

You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!