Front Page
-
[Homebrewed Electricity
--
(wind)
(solar)
(hydro)
(steam)
(controls)
(storage)
(mechanical)
]
-
Classifieds
-
Site News
Everything
-
Newbies
-
[Remote Living
--
(housing)
(heat)
(light)
(water)
]
-
Rants & Opinion
-
Diaries
-
Our Products
8 qt cel and milage results
|
34
comments (34 topical, editorial)
Re: 8 qt cel and milage results
(
3.00 / 0
) (
#12
)
by tecker on Mon May 12th, 2008 at 07:54:23 AM MST
(
User Info
)
I'm building another anode today with graphite gouging rods I should be testing today or tomarrow (probably tomarrow )using an epoxy from Smooth on that's suitable for tooling (after it's baked) for an insulator. going to close the gap to the cylindical cathode to 1/4" .
[
Parent
]
Re: 8 qt cel and milage results
(
3.00 / 0
) (
#13
)
by methanolcat (
methanolcat (at)yahoo(dot)com
) on Mon May 12th, 2008 at 09:14:36 AM MST
(
User Info
)
I was going to suggest carbon rods, I heard they work well and don't have the problems of other electrodes but I just couldn't think of any kind of common pre-made item that you might try, gouging rods will probably work quite well without deteriorating, keep us posted.
Matt
[
Parent
]
8 qt cel and milage results
|
34
comments (34 topical, 0 editorial)
Menu
·
create account
·
How to use the board
·
FAQs
·
search the board
·
Google search the board
·
Old Otherpower Board
Login
Make a new account
Username:
Password:
You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here
. PLEASE include the username you signed up with!
