the Otherpower.com Discussion Board || Comments 8 qt cel and milage results

Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products

8 qt cel and milage results | 34 comments (34 topical, editorial)

Re: 8 qt cel and milage results (3.00 / 0) (#24)
by electrondady1 on Wed May 14th, 2008 at 06:38:45 AM MST
(User Info)

it's looking like the speed of deterioration of the cathode is a real design factor .

rather than have it end up as muck at the bottom of the cell,
i wonder if it could be some how deposited on the anode.?
like in electroplating.
then maybe poarity could be switched and the process reversed.?

[ Parent ]

Re: 8 qt cel and milage results (3.00 / 0) (#25)
by tecker on Wed May 14th, 2008 at 07:05:02 AM MST
(User Info)

It's the other way around here's a link that has a good explaination
http://en.wikipedia.org/wiki/Electrolysis_of_water
they are using platinum ( I don't have any laying around ) you can see the oxygen concentration is the problem the stainless stock pot is in fine shape (hydrogen side) . My son suggested copper . So I'll give it a try going to be mean green .But copper oxides are conductive I 'll let you know .

[ Parent ]

Re: 8 qt cel and milage results (3.00 / 0) (#26)
by tecker on Wed May 14th, 2008 at 07:08:12 AM MST
(User Info)

The electrolosys and then reverse polarity sounds good I'll look up a list of possible metal pairs.

[ Parent ]

8 qt cel and milage results | 34 comments (34 topical, 0 editorial)

Menu

· create account
· How to use the board
· FAQs
· search the board
· Google search the board
· Old Otherpower Board

Login

Make a new account

Username:

Password:

You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!