Go to Otherpower.com Home Page Go to Forcefield Shopping Cart Go to Wondermagnet.com Home Page
Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products
prop shape needs to be flat on windward side? | 24 comments (24 topical, editorial)
Re: Thanks back to experimenting (3.00 / 0) (#14)
by ghurd on Tue May 13th, 2008 at 09:27:52 AM MST
(User Info)

Hehe.  At 12V it was 35~40ma.  So about 1/2W.
They did a lot better amps at lower volts, but still about 1/2 or 2/3 watts.

If you are looking for 6V, I might have something better,  
If I didn't lose it.  Couple hundred ma at 6V, but won't hit 12V.
No fancy tire on it.
G-

[ Parent ]



prop shape needs to be flat on windward side? | 24 comments (24 topical, 0 editorial)

Menu
· create account
· How to use the board
· FAQs
· search the board
· Google search the board
· Old Otherpower Board

Login
Make a new account
Username:
Password:

Powered by Scoop
You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!