the Otherpower.com Discussion Board || Comments prop shape needs to be flat on windward side?

Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products

prop shape needs to be flat on windward side? | 24 comments (24 topical, editorial)

Re: prop shape needs to be flat on windward side? (3.00 / 0) (#21)
by spinningmagnets (velmis1450bc(at)aol(dot)com) on Sat May 17th, 2008 at 12:16:27 PM MST
(User Info)

A useful search term is "draw knife"

http://www.endtimesreport.com/pictures/draw_knife.jpg

You could make one with a perfect size of handles and frame for your size of projects, and make the blades separate, so they could be changed to different shapes, or easily replaced when sharpening wears them down too low.

[ Parent ]

Re: prop shape needs to be flat on windward side? (3.00 / 0) (#23)
by elvin1949 (elvin1949@yahoo.com) on Sat May 17th, 2008 at 03:35:25 PM MST
(User Info)

HF sells draw knifes and spokeshaves.
Both good woodworking tools.
later
Elvin

[ Parent ]

prop shape needs to be flat on windward side? | 24 comments (24 topical, 0 editorial)

Menu

· create account
· How to use the board
· FAQs
· search the board
· Google search the board
· Old Otherpower Board

Login

Make a new account

Username:

Password:

You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!