Go to Otherpower.com Home Page Go to Forcefield Shopping Cart Go to Wondermagnet.com Home Page
Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products
Ram Pump Problem | 14 comments (14 topical, editorial)
Re: Ram Pump Problem (3.00 / 0) (#4)
by noblelivestock on Sat Jun 14th, 2008 at 09:48:24 PM MST
(User Info)

I thought about what you said. I had put an air bladder in the air chamber when I made the pump. Nevertheless, I took the air chamber off the pump and checked it for leaks, using an air compressor I pumped the air pressure up to 110 psi, then checked the pressure a couple hours latter. Didn't lose a single pound. Remounted the air chamber, pressured the whole pump (not so easy) with the same results. So the pump is tight, at least to best I'm able to test.

[ Parent ]


Ram Pump Problem | 14 comments (14 topical, 0 editorial)

Menu
· create account
· How to use the board
· FAQs
· search the board
· Google search the board
· Old Otherpower Board

Login
Make a new account
Username:
Password:

Powered by Scoop
You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!