Go to Otherpower.com Home Page Go to Forcefield Shopping Cart Go to Wondermagnet.com Home Page
Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products
Flat Plate Axial Mill Part 4 | 21 comments (21 topical, editorial)
Re: Flat Plate Axial Mill Part 4 (3.00 / 0) (#7)
by brianc4 on Mon Jun 9th, 2008 at 08:00:06 AM MST
(User Info)

John,

 I will bring the cord down the outside of the tower a few feet and enter the pipe tower just above the guy points. I have some good strain relief fittings & holders with a spring on them to support the cord. I will put a steel saftey cable that comes tight before the cord does just in case it winds up more than a turn and a half. I am taking out several acres of trees at my cabin and with a 40' tower I hope to be in clear air with very little turbulence.

 Brian Clark

[ Parent ]



Flat Plate Axial Mill Part 4 | 21 comments (21 topical, 0 editorial)

Menu
· create account
· How to use the board
· FAQs
· search the board
· Google search the board
· Old Otherpower Board

Login
Make a new account
Username:
Password:

Powered by Scoop
You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!