Go to Otherpower.com Home Page Go to Forcefield Shopping Cart Go to Wondermagnet.com Home Page
Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products
stator mold | 14 comments (14 topical, 0 editorial)
Re: stator mold (3.00 / 0) (#4)
by DanB (danb@*no spam*otherpower.com) on Mon Jul 21st, 2008 at 03:53:06 PM MST
(User Info) http://www.otherpower.com/

you shouldn't need a full sheet really.  Even a bit of thin stuff to line a plywood mold on the bottom and top would be good, and ifyou're really picky then get some half inch stuff for the sides.
If you make the mold out of HDPE only - it will warp over time.  We've wound up bolting ours to some very thick partical board (from a solid door) to keep it flat.

[ Parent ]


stator mold | 14 comments (14 topical, 0 editorial)

Menu
· create account
· How to use the board
· FAQs
· search the board
· Google search the board
· Old Otherpower Board

Login
Make a new account
Username:
Password:

Powered by Scoop
You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!