Go to Otherpower.com Home Page Go to Forcefield Shopping Cart Go to Wondermagnet.com Home Page
Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products
stator mold | 14 comments (14 topical, editorial)
Re: stator mold (3.00 / 0) (#7)
by electronbaby (roy<at>windsine.org) on Mon Jul 21st, 2008 at 05:48:12 PM MST
(User Info) http://www.windsine.org

I just had a plywood mold I have used many times before, fail due to casting in high ambient temps. I thought I decreased the hardener enough, but the heat broke down the grease I normally use. Ive been casting stators for a while, and never had a failure. This one I just tried to get out of the mold is completely shot. I took some pics. Ill post them soon if I get a chance. I am also looking at the HDPE stuff. It might save a headache, and the next $100 of copper  :-/
Have Fun!! RoyR KB2UHF


stator mold | 14 comments (14 topical, 0 editorial)

Menu
· create account
· How to use the board
· FAQs
· search the board
· Google search the board
· Old Otherpower Board

Login
Make a new account
Username:
Password:

Powered by Scoop
You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!