Go to Otherpower.com Home Page Go to Forcefield Shopping Cart Go to Wondermagnet.com Home Page
Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products
Diode Setup for 24 volt | 12 comments (12 topical, editorial)
Re: Diode Setup for 24 volt (3.00 / 0) (#2)
by wpowokal on Thu Jul 31st, 2008 at 10:47:49 PM MST
(User Info)

Most if not all panels have blocking diodes built into the junction box, if so then no need for any more just fuse the output of each two seriesed panels with an apropriate size fuse say 10 amp.

allan down under
A life lived in fear is a life half lived.



Diode Setup for 24 volt | 12 comments (12 topical, 0 editorial)

Menu
· create account
· How to use the board
· FAQs
· search the board
· Google search the board
· Old Otherpower Board

Login
Make a new account
Username:
Password:

Powered by Scoop
You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!