Go to Otherpower.com Home Page Go to Forcefield Shopping Cart Go to Wondermagnet.com Home Page
Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products
How to carve blades with a chainsaw | 21 comments (21 topical, 0 editorial)
Re: How to carve blades with a chainsaw (3.00 / 0) (#20)
by oztules (oztules__at__bigpond.com) on Tue Aug 5th, 2008 at 04:24:05 PM MST
(User Info) http://www.anotherpower.com/gallery/Oztules-toys

Gidday Twin Triode

The mill will power a very tiny part of the island, the pics of the alt are here: http://www.anotherpower.com/gallery/album96

The chainsaw jig seems to allow all kinds of things, and baffle are no problem, I'm now going  use the same kind of thing to slit logs into planks into blades perhaps. There are some slitting blades that do the long grain cutting a bit faster...but could be prone to drift if not sharpened properly.. will check up on this soon.

>93.... tough ask I think. Particularly in now days of cheap high power.

nice unit the fisher smooth

......oztules
Flinders Island Australia
[ Parent ]



How to carve blades with a chainsaw | 21 comments (21 topical, 0 editorial)

Menu
· create account
· How to use the board
· FAQs
· search the board
· Google search the board
· Old Otherpower Board

Login
Make a new account
Username:
Password:

Powered by Scoop
You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!