Author Topic: Post-PMA  (Read 1572 times)

0 Members and 1 Guest are viewing this topic.

THDLink

  • Newbie
  • *
  • Posts: 46
  • Country: us
  • /\ Fenner wind farm
Post-PMA
« on: August 16, 2015, 10:55:12 PM »
I'm  one of those people that fell for PMA turbine antics (advertising). I'm sure some of you have too.. what can one build with the parts that is more useful?
"We're going to need more batteries"

SparWeb

  • Global Moderator
  • Super Hero Member Plus
  • *****
  • Posts: 5452
  • Country: ca
    • Wind Turbine Project Field Notes
Re: Post-PMA
« Reply #1 on: August 17, 2015, 02:45:37 PM »
Use the magnets will hold pictures of your kids and family on the fridge.  Forever.

DIY audio speakers.
No one believes the theory except the one who developed it. Everyone believes the experiment except the one who ran it.
System spec: 135w BP multicrystalline panels, Xantrex C40, DIY 10ft (3m) diameter wind turbine, Tri-Star TS60, 800AH x 24V AGM Battery, Xantrex SW4024
www.sparweb.ca

electrondady1

  • SuperHero Member
  • ******
  • Posts: 3120
  • Country: ca
Re: Post-PMA
« Reply #2 on: August 17, 2015, 04:46:31 PM »
cold fusion ?

THDLink

  • Newbie
  • *
  • Posts: 46
  • Country: us
  • /\ Fenner wind farm
Re: Post-PMA
« Reply #3 on: August 29, 2015, 12:25:49 AM »
I would put a triple pipe conical anchored or non anchored base on that or it'll fly away. Fallover is what I meant. Really though, spin out of control and rip up the base. Never built one myself so what do i know, expensive unless you got the skill. Plan on making it non anchored. Base of base at ground would be cement with floating cap. Have we strong wires compatible with this? Or just many? Many would work better orno?
"We're going to need more batteries"