Author Topic: HYDRAULIC TOWER (Read 6887 times)

atasan2006 · « **on:** March 14, 2016, 02:58:35 PM »

this tower was 13 meters in length

atasan2006 · « **Reply #1 on:** March 14, 2016, 03:18:11 PM »

tower

atasan2006 · « **Reply #2 on:** March 14, 2016, 03:24:24 PM »

tower

atasan2006 · « **Reply #3 on:** March 14, 2016, 03:28:03 PM »

tower

atasan2006 · « **Reply #4 on:** March 14, 2016, 03:33:33 PM »

video tower https://www.youtube.com/watch?v=hhIeU2Y9Z7s https://www.youtube.com/watch?v=t8rWXiYQR1I

electrondady1 · « **Reply #5 on:** March 14, 2016, 06:45:53 PM »

congratulations Atasan

atasan2006 · « **Reply #6 on:** March 15, 2016, 01:55:17 PM »

Thank you very much dear electrondady1

topper · « **Reply #7 on:** March 15, 2016, 02:17:50 PM »

Somedays I wish I had moved out to a farm. Congrats on a successful raising of your mill.

atasan2006 · « **Reply #8 on:** March 15, 2016, 02:27:42 PM »

Thank you very much dear topper good luck

kitestrings · « **Reply #9 on:** March 15, 2016, 09:22:53 PM »

Looks great atasan.

You have a video of a variable pitch hub. I that a different turbine/project? This one looks to be fixed.

Good luck, ~ks

midwoud1 · « **Reply #10 on:** March 16, 2016, 06:10:02 AM »

Hi Atasan.

Well done. It looks you made a complete new windmill. We are curious about your experience with the active pitch hub.
How does the safety control work in case of storm?
Hydraulics is good for raise and lower. What size is the hydraulic ram ? What size is the mast angle-iron ?

Rgds. Midwoud1

kitestrings · « **Reply #11 on:** March 16, 2016, 08:29:06 AM »

Oh, and tell us about the broken blade under the tail. There's got to be a story there. ~ks

atasan2006 · « **Reply #12 on:** March 16, 2016, 02:41:31 PM »

Quote from: kitestrings on March 15, 2016, 09:22:53 PM

Looks great atasan.

You have a video of a variable pitch hub. I that a different turbine/project? This one looks to be fixed.

Good luck, ~ks

atasan2006 · « **Reply #13 on:** March 16, 2016, 03:06:40 PM »

yes this prototype

atasan2006 · « **Reply #14 on:** March 16, 2016, 03:13:31 PM »

blades stationary tail furling

atasan2006 · « **Reply #15 on:** March 16, 2016, 03:34:52 PM »

Quote from: midwoud1 on March 16, 2016, 06:10:02 AM

Hi Atasan.

Well done. It looks you made a complete new windmill. We are curious about your experience with the active pitch hub.
How does the safety control work in case of storm?
Hydraulics is good for raise and lower. What size is the hydraulic ram ? What size is the mast angle-iron ?

Rgds. Midwoud1

the hydraulic ram 60 ton tower and turbine weight of 1 ton I'm sorry, I use google translation

atasan2006 · « **Reply #16 on:** March 16, 2016, 04:00:36 PM »

Quote from: kitestrings on March 16, 2016, 08:29:06 AM

Oh, and tell us about the broken blade under the tail. There's got to be a story there. ~ks

kitestrings · « **Reply #17 on:** March 16, 2016, 08:35:41 PM »

Sorry about the blades. The design is complex, but interesting.

So, the latest one has a furling tail, but what makes it furl? The alternator does not appear to be off-set.

~ks

atasan2006 · « **Reply #18 on:** March 17, 2016, 03:59:38 PM »

incomplete drawing

midwoud1 · « **Reply #19 on:** March 17, 2016, 05:35:23 PM »

There is a panel square in the wind,moving a rod to the hub in a lineair motion like an actuator on windforce.
But the efficiency and accurate reaction will be low because the`panÃ¨l is in thÃ¨ `wakÃ¨ of the propeller.
I see an inventor was looking for a way to feather the prop without actuator control.

The second design seems to have no offset and tail furling by a dropline.
As far as we can see on the pictures .
Respect for Atasan.

News:

Author Topic: HYDRAULIC TOWER (Read 6887 times)