« previous next »
Pages: [1]   Go Down

Author Topic: New Here  (Read 1711 times)

0 Members and 1 Guest are viewing this topic.

Blink33

  • Newbie
  • *
  • Posts: 3
  • Country: ca
New Here
« on: August 31, 2016, 01:46:36 PM »
Hello new here and love all the info on this board. Looking for manuals and scimatics for the Sencenbaugh 1000 14  turbine. Any info would be great we have had it running at our cottage but seems the controller board is not working.
Thanks
Logged

DamonHD

  • Administrator
  • Super Hero Member Plus
  • *****
  • Posts: 4125
  • Country: gb
    • Earth Notes
Re: New Here
« Reply #1 on: August 31, 2016, 03:07:10 PM »
Logged
Podcast: https://www.earth.org.uk/SECTION_podcast.html

@DamonHD@mastodon.social

Blink33

  • Newbie
  • *
  • Posts: 3
  • Country: ca
Re: New Here
« Reply #2 on: August 31, 2016, 10:26:18 PM »
So I looked over that thread and did a search. I'm looking for the manual I think kitestings had it in PDF form. Does anyone else?
Logged

kitestrings

  • Hero Member
  • *****
  • Posts: 1376
Re: New Here
« Reply #3 on: September 01, 2016, 01:22:30 PM »
Hi Blink,

I have a pdf manual, but I don't know how to post it here.  I think the file is too large.  If you send me a pm I can email it to you.

Generally if the board is bad you can test by applying full field current.  To do this you temporarily short the F (field) wire to the right of the other field wire to Batt negative with winds of ~10 mph or more.  Watch the amp gage if it shows output the board is bad and needs to be repaired or replaced.

Good luck, ~ks
Logged

Blink33

  • Newbie
  • *
  • Posts: 3
  • Country: ca
Re: New Here
« Reply #4 on: September 05, 2016, 01:14:53 PM »
Thanks Kitestrings for the manual and info.
Logged
Pages: [1]   Go Up
« previous next »