Fieldlines.com: The Otherpower discussion board

Product Reviews => Reviews => Topic started by: getterdone on June 24, 2012, 10:12:34 AM

Title: fiberglass 10'6'' blades set from CMS Magnetics, Inc
Post by: getterdone on June 24, 2012, 10:12:34 AM
I bought a set of thease blades/ with hub, and nose cone.
they seem real nice,[made very well]  priced at $198.00 thats a good buy in my book.
I'll post when i get em up and flying. noise, power.,ect....
the hub is not drilled for our 4bolt hubs. but is doable.   it is made very strong. a little heavy though.
we'll see how they will fly.
Title: Re: fiberglass 10'6'' blades set from CMS Magnetics, Inc
Post by: coldspot on July 11, 2012, 03:57:55 PM


 How are they for balanced weight between them ??

 I've gotten some shorter ones that required a lot to balance.
 And some that only needed what I could put on with
 a paint spray can to equal out.

Title: Re: fiberglass 10'6'' blades set from CMS Magnetics, Inc
Post by: vassile52 on November 17, 2017, 12:33:45 AM
Can u post a few pictures,pse?
Tnx!