Author Topic: Hole in one on the on a two speed  (Read 2240 times)

0 Members and 1 Guest are viewing this topic.

tecker

  • SuperHero Member
  • ******
  • Posts: 2183
Hole in one on the on a two speed
« on: March 18, 2008, 12:20:30 AM »
I got the 1/6 hp ready   and rigged up this quarter hoarse (230v 2amp 2 speed GE)While I waiting for wire. I was able to catch good power from both speeds and the starts by fudgeing between the 5 slot low and 4 slot high speed useing the slant angle on the rotor the starts came in good also . I thought that might be interesting .







resize your screen shots they are over 1000 pixels wide they need to be under 640 wide if you would crop the section out you want to show and leave out all that blue screen it would be much better.
Kurt
« Last Edit: March 18, 2008, 12:20:30 AM by (unknown) »

tecker

  • SuperHero Member
  • ******
  • Posts: 2183
Re: Hole in one on the on a two speed
« Reply #1 on: March 18, 2008, 08:28:37 AM »
I don't see that they're a 96 k jpeg
« Last Edit: March 18, 2008, 08:28:37 AM by tecker »

tecker

  • SuperHero Member
  • ******
  • Posts: 2183
Re: Hole in one on the on a two speed
« Reply #2 on: March 18, 2008, 08:31:45 AM »
Ignore that I see the pixel boob
« Last Edit: March 18, 2008, 08:31:45 AM by tecker »

tecker

  • SuperHero Member
  • ******
  • Posts: 2183
Re: Hole in one on the on a two speed
« Reply #3 on: March 18, 2008, 09:19:00 AM »
            done

lowspeed





highspeed





starts



« Last Edit: March 18, 2008, 09:19:00 AM by tecker »

vawtman

  • Hero Member
  • *****
  • Posts: 1425
Re: Hole in one on the on a two speed
« Reply #4 on: March 18, 2008, 04:49:20 PM »
Hi Tecker

 Those motors look huge in comparison with other things lying around :>)


 Weird photo.No camera expert yet.


 Have fun

 Mark

« Last Edit: March 18, 2008, 04:49:20 PM by vawtman »

tecker

  • SuperHero Member
  • ******
  • Posts: 2183
Re: Hole in one on the on a two speed
« Reply #5 on: March 18, 2008, 07:30:17 PM »
It's cropped and the outer 100dpi
« Last Edit: March 18, 2008, 07:30:17 PM by tecker »

tecker

  • SuperHero Member
  • ******
  • Posts: 2183
Re: Hole in one on the on a two speed
« Reply #6 on: March 18, 2008, 08:38:02 PM »
I was hoping to set this up as a rotory inverter . we'll see







« Last Edit: March 18, 2008, 08:38:02 PM by tecker »

feral air

  • Sr. Member
  • ****
  • Posts: 293
I know what your mouse is thinking
« Reply #7 on: March 19, 2008, 08:48:29 AM »
Your drunken footwear will wake with a new tattoo and your disgruntled mouse ponders life...





Lovely project! All in good fun. take it easy

« Last Edit: March 19, 2008, 08:48:29 AM by feral air »

tecker

  • SuperHero Member
  • ******
  • Posts: 2183
Re: I know what your mouse is thinking
« Reply #8 on: March 20, 2008, 06:50:26 AM »
The maids year off . Coffee and beer untill the garden gets going .The general  food supply is  poisoned .Am limiting intake to control dental overload ."We be havin a goooood taimm down heair"
« Last Edit: March 20, 2008, 06:50:26 AM by tecker »