Author Topic: Delco Bike fork downwind up for test  (Read 1123 times)

0 Members and 1 Guest are viewing this topic.

tecker

  • SuperHero Member
  • ******
  • Posts: 2183
Delco Bike fork downwind up for test
« on: February 16, 2009, 12:19:50 AM »
We were talking about Delcos earlier in the week so I cut down a mount from a while back and set the stud for this unit .Rewound 12 turns per coil awg 18 200c it does 38 volts open on the bike and charges the 24 volt bank with a good work out  1.2 amps from the pwm on the rotor  I uploaded some video late today .You can kinda see it track . Will  have to plumb the mast and a little better balance I think for a good track , I 'll replace the video when finished . Wrapping  it up will post the full spread inside and out .http://www.youtube.com/watch?v=4KM8gBerCFc
« Last Edit: February 16, 2009, 12:19:50 AM by (unknown) »