Author Topic: Brush Generator [CLOSED]  (Read 1428 times)

0 Members and 1 Guest are viewing this topic.

jaymacmcg

  • Newbie
  • *
  • Posts: 4
Brush Generator [CLOSED]
« on: January 14, 2010, 02:02:48 AM »
Thank you Flux.


Thats really good stuff.


I once worked in a factory manufacturing heating elements for domestic heaters and may be able to contact some of my erstwhile colleagues to get some insulators and element winding wire. I'd say with a bit of experimenting I might come up with a suitable resistor.


thanks again

jaymac.

« Last Edit: January 14, 2010, 02:02:48 AM by (unknown) »

TomW

  • Super Hero Member Plus
  • *******
  • Posts: 5130
  • Country: us
Re: Brush Generator [CLOSED]
« Reply #1 on: January 14, 2010, 03:12:55 AM »
You really should keep this in one thread for brevity


Tom

« Last Edit: January 14, 2010, 03:12:55 AM by TomW »