Author Topic: Cutting ceramic magnets??  (Read 942 times)

0 Members and 1 Guest are viewing this topic.

Tippy

  • Newbie
  • *
  • Posts: 9
Cutting ceramic magnets??
« on: February 12, 2005, 08:50:16 PM »
can you?? and if so does it take a special saw or a band sae will do the job??

« Last Edit: February 12, 2005, 08:50:16 PM by (unknown) »

Norm

  • Hero Member
  • *****
  • Posts: 1845
  • Country: us
  • Ohio's sharpest corner
Re: Cutting ceramic magnets??
« Reply #1 on: February 12, 2005, 03:05:17 PM »
This might help answer your question.

http://www.fieldlines.com/story/2004/12/15/6349/3548

            Have Fun!

               ( :>) Norm.
« Last Edit: February 12, 2005, 03:05:17 PM by Norm »

hobot

  • Jr. Member
  • **
  • Posts: 70
Re: Cutting ceramic magnets??
« Reply #2 on: February 12, 2005, 04:53:05 PM »
I will be taking mine to a highend machine shop that has a

Water Jet cutter. Thin clean cut though anything and no heat or

shock introduced and simple to program shapes or just lay

the shape on a digital scanner and presto it knows what to cut.

Not sure the cost yet and one most be in range to find a shop

like this or send parts to.


hobot

« Last Edit: February 12, 2005, 04:53:05 PM by hobot »