« previous next »
Pages: [1]   Go Down

Author Topic: 5 or 6 foot wooden blades needed  (Read 769 times)

0 Members and 1 Guest are viewing this topic.

homemadegenny

  • Newbie
  • *
  • Posts: 12
5 or 6 foot wooden blades needed
« on: July 16, 2006, 05:04:07 PM »
I am looking for a website that has instructions on how to make 5-6 foot wooden blades for a 3 blade setup. Any help would be great thanks. I am new to this.
« Last Edit: July 16, 2006, 05:04:07 PM by (unknown) »
Logged

picmacmillan

  • Hero Member
  • *****
  • Posts: 523
Re: 5 or 6 foot wooden blades needed
« Reply #1 on: July 16, 2006, 11:12:32 AM »
hello hmg...there is plenty of step by step instructions right here...look at danb's old posts..on all the old gennies he has made..it has pictures drawings and dimensions right on the sheets he has...i have built his blades and the y work real good...they are simple to understand and to make...there is a link right here on this site..it think its on the front page..also hugh piggot has a book for sale, and is available here also...myself and many many others have also posted on making good blades...good luck on your project..pickster

« Last Edit: July 16, 2006, 11:12:32 AM by picmacmillan »
Logged

billymc

  • Newbie
  • *
  • Posts: 16
Re: 5 or 6 foot wooden blades needed
« Reply #2 on: July 16, 2006, 05:42:40 PM »
Try this link: http://www.scoraigwind.com/selfblade/index.htm

Its for a little larger unit but you should be able to just shorten up the stations a little bit and use the same profiles. Have to convert cm to inches.
« Last Edit: July 16, 2006, 05:42:40 PM by billymc »
Logged

Bobbyb

  • Newbie
  • *
  • Posts: 35
Re: 5 or 6 foot wooden blades needed
« Reply #3 on: July 17, 2006, 12:48:12 PM »
http://www.scoraigwind.com/selfblade/index.htm

yea I've dun the same for my 5 feet blades and they spin nicely
« Last Edit: July 17, 2006, 12:48:12 PM by Bobbyb »
Logged
Pages: [1]   Go Up
« previous next »