« previous next »
Pages: [1]   Go Down

Author Topic: material needed  (Read 2279 times)

0 Members and 1 Guest are viewing this topic.

Isaiah

  • Full Member
  • ***
  • Posts: 140
material needed
« on: December 09, 2010, 10:18:17 PM »
 We are looking for some aluminum disk's  about 1/8'' to 3/8''s thick and 3- 6 inches in diameter.
This is to machine hubs for mini mills.
 Anyone with some material contact Isaiah10 or bub73.
Logged
Pages: [1]   Go Up
« previous next »