Author Topic: fiberglass 10'6'' blades set from CMS Magnetics, Inc  (Read 5309 times)

0 Members and 1 Guest are viewing this topic.

getterdone

  • Jr. Member
  • **
  • Posts: 79
  • living off grid
fiberglass 10'6'' blades set from CMS Magnetics, Inc
« on: June 24, 2012, 12:12:34 PM »
I bought a set of thease blades/ with hub, and nose cone.
they seem real nice,[made very well]  priced at $198.00 thats a good buy in my book.
I'll post when i get em up and flying. noise, power.,ect....
the hub is not drilled for our 4bolt hubs. but is doable.   it is made very strong. a little heavy though.
we'll see how they will fly.

coldspot

  • Hero Member
  • *****
  • Posts: 843
  • Country: us
Re: fiberglass 10'6'' blades set from CMS Magnetics, Inc
« Reply #1 on: July 11, 2012, 05:57:55 PM »


 How are they for balanced weight between them ??

 I've gotten some shorter ones that required a lot to balance.
 And some that only needed what I could put on with
 a paint spray can to equal out.

$0.02

vassile52

  • Jr. Member
  • **
  • Posts: 90
  • Country: ca
Re: fiberglass 10'6'' blades set from CMS Magnetics, Inc
« Reply #2 on: November 17, 2017, 02:33:45 AM »
Can u post a few pictures,pse?
Tnx!