Logged in users > User Diaries
New Blades
Boondocker:
The first set of blades made for this wind turbine were carved with a S822 airfoil.
http://www.fieldlines.com/index.php/topic,147743.msg1024937.html#msg1024937
Using the program QBlade performed some comparisons of different blades. The black line is a blade using a hybrid air foil using NACA 4415 & GOE 222. This is really a fun program to look at different foils and render a blade.
hiker:
nice blades and gen...........
kitestrings:
So (in the second photo) is that one of the new blades on the left, and one of the original on the right? The left one appears a bit longer. Is this to get more power/better match to the alt?
Regards, ~ks
Boondocker:
KS,
The blade is indeed larger, rotor diameter is now 13.25'. With these new blades, power has increased. Seeing 200 watts produced at 11 mph (approximate), and 300 watts with a 12 mph (approx).
Matching the blades to the alternator is easily accomplished programming the Midnite Classic Charge.
Boondocker:
Yesterday afternoon had some nice winds to test out the new blades. 18 mph wind, gusting at 35mph.
The below photo was taken during a gust.
Navigation
[0] Message Index
[#] Next page
Go to full version