Author Topic: Hugh Piggott version for beginners  (Read 891 times)

0 Members and 1 Guest are viewing this topic.

johnnym

  • Newbie
  • *
  • Posts: 34
  • Country: us
Hugh Piggott version for beginners
« on: February 16, 2017, 07:19:08 PM »
I got conned into the pma thing because of my own ignorance. I know a lot of Hugh Piggott plans can be found online. What would be the easiest one to start with - the most simple version?

clockmanFRA

  • Sr. Member
  • ****
  • Posts: 477
  • Country: fr
    • Echorenovate
Re: Hugh Piggott version for beginners
« Reply #1 on: February 18, 2017, 12:00:08 AM »
Hi johnnym,

I have 3off 3.7m (12 footers) HP design Wind Turbines, been flying them for years.

Hugh does a book, sends it anywhere on this planet, and this book lists 6 of his different sizes, from 1.2m dia to 4.2m diameter.

http://scoraigwind.co.uk/all-of-the-books-by-hugh-how-to-get-them/

I thoroughly recommend hughs book. ....... Its a REAL practical hands on book with step by step instructions and contains all the necessary information to make everything.

He also does another New book (& digital version), where he uses ferrite magnets.

https://www.smashwords.com/books/view/445583

Have fun
Everything is possible, just give me time.

OzInverter man. Normandy France.

3off Hugh P's 3.7m Wind T's (9 years).  .. 5kW PV on 3 Trackers, (5 yrs) .. 9kW PV AC coupled Used/SH GTI's, on my OzInverter created Grid, and back charging with AC Coupling to the OzInverter to my 48v 1300ah batteries.