Author Topic: F&P Stator and magnet drum plus mount for a HAWT  (Read 486 times)

0 Members and 1 Guest are viewing this topic.

Mary B

  • Hero Member
  • *****
  • Posts: 752
F&P Stator and magnet drum plus mount for a HAWT
« on: August 19, 2017, 02:48:51 AM »
F&P stator and hub along with a Randy's Workshop mount for a horizontal wind turbine. The mount uses a Yaesu thrust bearing(can buy from ham radio stores like DX Engineering, Gigaparts etc. I can get you links to them) to mount to the mast and has a swivel mount for the tail to turn it out of the wind. I have to much going on plus I cannot do the tower work I used to so getting this up is not an option. My back is getting worse so time to thin the project herd and concentrate on stuff I can do on the ground.

Asking $140+ actual shipping from 56237. It is large and heavy so it will be ~$50 or more I am betting.





Not in the picture but I have a pulley mount I was going to modify to use as a mount for the blades. It will need shimming and set screws added plus a plate made to mount the blades to. I will include that also(was $15 new)

Mary B

  • Hero Member
  • *****
  • Posts: 752
Re: F&P Stator and magnet drum plus mount for a HAWT
« Reply #1 on: September 04, 2017, 01:08:59 PM »
$135 plus I have a 3 phase rectifier assembly for it.

Mary B

  • Hero Member
  • *****
  • Posts: 752
Re: F&P Stator and magnet drum plus mount for a HAWT
« Reply #2 on: September 15, 2017, 04:46:06 PM »
$125, I need this gone!