Author Topic: axial generator with lamination core  (Read 912 times)

0 Members and 3 Guests are viewing this topic.

mbouwer

  • Sr. Member
  • ****
  • Posts: 355
  • Country: nl
axial generator with lamination core
« on: November 07, 2017, 04:41:45 AM »
Windmill friends,

This forum seems to me the right place to exchange ideas on a test setup of an axial generator.
Now I have 2 magnet rings and an axle.

mbouwer

  • Sr. Member
  • ****
  • Posts: 355
  • Country: nl
Re: axial generator with lamination core
« Reply #1 on: November 07, 2017, 09:15:45 AM »
Got 51 lamination packages now ( 20 x 8 x 8 ) cut out of transformer sheets.

I think of gluing  49 magnets 20 x 10 x 5 mm on the magnet backing rings ( thickness 4 mm)
« Last Edit: November 07, 2017, 09:24:56 AM by mbouwer »

joestue

  • Hero Member
  • *****
  • Posts: 1419
Re: axial generator with lamination core
« Reply #2 on: November 07, 2017, 12:21:59 PM »
Got 51 lamination packages now ( 20 x 8 x 8 ) cut out of transformer sheets.

I think of gluing  49 magnets 20 x 10 x 5 mm on the magnet backing rings ( thickness 4 mm)

odd numbers don't work for magnets.

mbouwer

  • Sr. Member
  • ****
  • Posts: 355
  • Country: nl
Re: axial generator with lamination core
« Reply #3 on: November 07, 2017, 01:18:05 PM »
Of course.
Then I can go to 48 or 54 magnets.
Or does it make sense to go to the maximum of 80 magnets?

mbouwer

  • Sr. Member
  • ****
  • Posts: 355
  • Country: nl
Re: axial generator with lamination core
« Reply #4 on: November 08, 2017, 03:04:01 AM »
With 51 packages the space for the coil-legs is 8 mm.
I tend to 48 packages with coil-legs 9 mm.

mbouwer

  • Sr. Member
  • ****
  • Posts: 355
  • Country: nl
Re: axial generator with lamination core
« Reply #5 on: November 08, 2017, 07:52:53 AM »
the mold to position the 48 blocks in the polyester of the stator.
« Last Edit: November 08, 2017, 07:58:51 AM by mbouwer »

SparWeb

  • SuperHero Member
  • ******
  • Posts: 3307
  • Country: ca
    • Wind Turbine Project Field Notes
Re: axial generator with lamination core
« Reply #6 on: November 08, 2017, 11:18:13 PM »
Can you give us a reminder of the turbine specification you intend to build, please?
Blade diameter, airfoil type...
Generator number of magnetic poles, number of phases, expected power output...
No one believes the theory except the one who developed it.  Everyone believes the experiment except the one who ran it.

System spec: 135w BP multicrystalline panels, regulated by Xantrex C40, DIY 8ft diameter wind turbine, regulated by Tri-Star TS60, 800AH x 24V AGM Battery, Xantrex SW4024

mbouwer

  • Sr. Member
  • ****
  • Posts: 355
  • Country: nl
Re: axial generator with lamination core
« Reply #7 on: November 09, 2017, 03:00:22 AM »
Inspired by the professional windmills around, the idea is that I first need to create test setups,
 
to, together with windmill builders on this forum, search for a design of a light direct drive generator with operational reliability.

In doing so we must be able to build that generator with stuff that is common and easy available for me and windmill friends on the forum.

It seems to me that the generator is the most difficult component.

mbouwer

  • Sr. Member
  • ****
  • Posts: 355
  • Country: nl
Re: axial generator with lamination core
« Reply #8 on: November 10, 2017, 05:21:09 AM »
If we could manage to get more collaboration we also can use each other's molds.

mbouwer

  • Sr. Member
  • ****
  • Posts: 355
  • Country: nl
Re: axial generator with lamination core
« Reply #9 on: November 11, 2017, 03:14:01 AM »
Detail of the mold with attachment point and cutouts for the stiffening rings and the terminal of the stator.
« Last Edit: November 11, 2017, 03:21:43 AM by mbouwer »

mbouwer

  • Sr. Member
  • ****
  • Posts: 355
  • Country: nl
Re: axial generator with lamination core
« Reply #10 on: November 12, 2017, 03:58:17 AM »
The packets are now pressed in a layer of polyester. Now ajusting my coilwinder to shape 24 coils of wire 0,5 mm.
« Last Edit: November 12, 2017, 04:03:13 AM by mbouwer »

mbouwer

  • Sr. Member
  • ****
  • Posts: 355
  • Country: nl
Re: axial generator with lamination core
« Reply #11 on: November 22, 2017, 03:32:59 AM »
modified coilwinder.