Hi again!
here are some pics of what is called a tapered cone coil winding head. very common in many motor repair shops. the photos i took are not the best quality, but together with some dimensions i gave, i think any one could use some hard wood blocks, a router, some glue and a 3/8 threaded rod to hold it all together. this head works beautifully to make multi span coils for 3 phase windings and can also be used to do many single phase windings.
i also put in some other photos of other types of winding heads used for single and three phase windings. we can discuss them some time in the future.
most of the dimentions i gave are pretty accurate, but the odd tiny little difference would not make any difference anyways.
have fun
zubbly
here are the other winding heads i mentioned
hope these pics and dimentions will be of use to some of you
zubbly :)
