the Otherpower.com Discussion Board || messed up my first post

Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products

messed up my first post
By blueyonder, Section Newbies Posted on Thu Aug 23rd, 2007 at 12:25:32 AM MST
try and try again

as a newbie . i wrote a nice long post about myself and my first windmill.
i wrote his first name is hugh . thats the name ive given to my mill.
as it was from hughs plans i built the metal work. the little face is the windy man. . but i did manage to get sum pics uploaded to my pic dept.
i will need to ask for help with this as its three phase but got four wires comming out.???. spent a long time writing that post and now ive lost it.
oh well . first things first. just saying thanks to all for putting your ideas and knowlege in print for all the world to see . john in uk.
its a ill wind that blows no good.

messed up my first post | 4 comments (4 topical, 0 editorial)

Re: messed up my first post (3.00 / 0) (#1)
by disaray1 on Thu Aug 23rd, 2007 at 06:08:36 AM MST
(User Info)

Hey John-

Look's like your making good progress on "Hugh". I do like the little Hugh face built on...gives a artsy personalized touch!

A couple of things: Is the tail boom made from EMT conduit or other? Is the motor shown in your file somehow attached on the back of the mini brake drum? And last but not least, on the upper shelf in your shop, right next to the reamers, there's a box of fingers. Are these your fingers or someone elses? ;)

Have fun!

David

Re: messed up my first post (3.00 / 0) (#2)
by blueyonder (windwoodgood at yahoo dot co dot uk) on Thu Aug 23rd, 2007 at 05:02:16 PM MST
(User Info)

hi david .its funny what comes over us when we get busy. yes maybe it can look a bit like arty . the tail boom is made from stainless steel ive had for years .
thought it would be nice to use it on the mill.
ive posted more pics so maybe you can understand how ive fixed it together.
it took me long enuff to think it out. but i collect so menny bits and bobs.
so given time i try make use of what i have rather than by bits.
a lot of the time ive made things from junk.
its a great feeling when your done and look at what you have made.
only thing is keeping all the usefull things i get my hands on.
so now was the time to use the nice bits of stainless pipe .

i think you must have the eyes of the eagle.
fingers in a box .??. maybe i am the bone collecter as well.
its chocolate fingers .
but if you look below the fingers you might see another box .
yes i like tin boxies. so try look its a whisky bottle box . in tin .
a malt whisky called Glenfidock. but its empty now. .
not sure if i spelt it right .
i want to build the axal fluz type gen but will carry on building this one .
having the bug helps a lot. i aint evan got this one sorted out yet and allready thinking about the next one.
cheers dave.

its a ill wind that blows no good
its a ill wind that dos no good
[ Parent ]

Re: messed up my first post (3.00 / 0) (#3)
by hiker (hiker.wild[at]yahoo[dot]com) on Fri Aug 24th, 2007 at 03:20:07 AM MST
(User Info)

try hooking up two fully bridged rectifiers to it--and then parelle the outputs...
check the voltage on each rectifer before you parelle ..just give it a good spin by hand--that should give you some idea on power out....good luck.....
WILD IN ALASKA
[ Parent ]

Re: messed up my first post (3.00 / 0) (#4)
by Experimental (harogate@whidbey.com(no spam)) on Mon Aug 27th, 2007 at 07:51:22 AM MST
(User Info)

Hello John,
Looked at your files and I say, Very nicely done and like mentioned by others, Really liked the face !!!
I see the drum is, just being used as a housing, and the magnets spin inside that, I wonder if the drum was necessary, as you have steel pole shoes in your coil assy -- so the metal in the drum acts more as a means of securing things,and prerhaps a bearing holder, but the mass might help and protects things !!
Anyway, nicely done and we look foreward to seeing the output figures, hopefully you are now busy, whittling out blades !!?? Bill H.....

messed up my first post | 4 comments (4 topical, 0 editorial)

Menu

· create account
· How to use the board
· FAQs
· search the board
· Google search the board
· Old Otherpower Board

Login

Make a new account

Username:

Password:

Total Views

70 Scoop users have viewed this posting.

Related Links

· Also by blueyonder

You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest © 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!