the Otherpower.com Discussion Board || pmg diesel

Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Rants & Opinion - Diaries - Our Products

pmg diesel
By rata2e, Section Mechanical Posted on Fri Aug 8th, 2008 at 06:51:57 PM MST
pmg for lister

evening all,
has any body built a pmg to suit a 750rpm and 1.5hp power input, or something along those lines.
i would love hear from you as i am looking to build one myself.
cheers rata2e

pmg diesel | 6 comments (6 topical, 0 editorial)

Re: pmg diesel (3.00 / 0) (#1)
by kurt on Fri Aug 8th, 2008 at 02:08:25 PM MST
(User Info)

http://www.otherpower.com/listeraxialflux.shtml

you gotta be the laziest person alive there is a link to that on the front page of www.otherpower.com with a picture even..... a few other people here have made there versions of it try google searching the board for lister pma or something like that.....

http://www.reresource.org/

IRC

Re: pmg diesel (3.00 / 0) (#2)
by rata2e on Sat Aug 9th, 2008 at 09:01:20 AM MST
(User Info)

you have miss read my post, but you are right there is lots to read for listeroid's and 2+kw pmg's.
but that isnt what i asked about, i am looking at a pmg of half that size or less and at a little more rev's.
i know the basic's on how to build one aswell, what i am after is the feedback from somebody if any who has built one to see if they made any tweak's etc.
lister owners do it 650 times a minute.
[ Parent ]

Re: pmg diesel (3.00 / 0) (#3)
by kurt on Sat Aug 9th, 2008 at 09:28:00 AM MST
(User Info)

Danb did a smaller one on some kind of portable diesel engine but that story is spread out over 5-6 Monday posts he used to do and it went through a couple stator changes.... you would have to search for all the related posts....

http://www.reresource.org/

IRC

Re: pmg diesel (3.00 / 0) (#4)
by electronbaby (roy<at>windsine.org) on Sat Aug 9th, 2008 at 02:33:06 PM MST
(User Info) http://www.windsine.org

google search the board:

"scotties mini petter"
Have Fun!! RoyR KB2UHF

Re: pmg diesel (3.00 / 0) (#5)
by spinningmagnets (velmis1450bc(at)aol(dot)com) on Sat Aug 9th, 2008 at 09:59:19 PM MST
(User Info)

Dear rata2e, you have stated that you would like a PMG driven at 750 RPM by a 1.5 HP engine.

What voltage would you like for it to produce?

Re: pmg diesel (3.00 / 0) (#6)
by rata2e on Sun Aug 10th, 2008 at 05:46:19 AM MST
(User Info)

thanks for the info guy's, as for voltage 12 or 24 volts i guess 24v is more eco.
i have two 12v batteries but havent bought the invertor yet, i would love to use round microwave oven magnets if possible as they are nearly free, but most plans i have found to date use bar magnets.
i was hopeing for about 800 watts.
any input would be helpful.
cheers rata2e
lister owners do it 650 times a minute.
[ Parent ]

pmg diesel | 6 comments (6 topical, 0 editorial)

Menu

� create account
� How to use the board
� FAQs
� search the board
� Google search the board
� Old Otherpower Board

Login

Make a new account

Username:

Password:

Total Views

��109 Scoop users have viewed this posting.

Related Links

� Also by rata2e

You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest � 2003 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!