Fieldlines.com || Make your electricity from scratch!

Front Page - [Homebrewed Electricity-- (wind) (solar) (hydro) (steam) (controls) (storage) (mechanical)] - Classifieds - Site News
Everything - Newbies - [Remote Living-- (housing) (heat) (light) (water)] - Reviews - Diaries - Our Products

Power distrobution parts
By Jerry, Section Classifieds Posted on Mon Oct 26, 2009 at 08:36:44 AM MST
Display with many parts, Digi. meters, fuse blocks, gnd blocks, fuses, lreds ect.

Since the close of my retail car stereo store we have a few things left over.
This is a power distrobution display from Audio Pipe.
Heres a list of parts on the display.

heavy duty ANL fuse holder with LED status ind. Accepts up to 2ga. wire.

platinum 80 amp ANL fuses.

heavy duty platinum AGU fuse holder with LED staus ind. Accepts up to 4ga. wire.

platinum 80 amp AGU fuse.

cap top digital volt meter with LED staus ind. Cap is not real, its fake.

Heavy duty platinum ANL fuse holder with digital volt meter and LED status ind. accepts up to 2 ga. wire

4 gang platinum AGU fuse block with 4 40 amp platinum AGU fuses with 4 gnd/neg block and 4 way LED staus ind.

seperate LEDs.

1 13.8 volt 1 amp wall wort power supply.
I can remove electronics from the thin plastic display or ship intackt. Its not heavy so shipping should be low.
Sugjested retail is $219.95. I'm selling this display and all these parts for $75. You pay shipping.
Here are a few pictures. I have a picture of the cap top in my files but it won't load here. This new sever thing or what ever it is has caused me some problems on this end. I'll load what I can.

Jerry

Power distrobution parts | 11 comments (11 topical)

Re: Power distrobution parts (3.00 / 0) (#1)
by Jerry on Mon Oct 26, 2009 at 03:15:47 PM MST

I'll try that picture again?

OH woops theres now no place to post a picture in a responce.

I sure liked the good old days when things worked. Oh well it ain't my board and I am thankfull for what ever I can get. I'll just post a new classified for this picture.

Jerry

Airheads Page

Re: Power distribution parts (3.00 / 0) (#2)
by TomW on Mon Oct 26, 2009 at 03:47:09 PM MST

Jerry;

Only picture in your files is this one:

BTW I fixed the typo in the title.

Tom

Ignarus can exsisto rememdium. Sardus est forever

[ Parent ]

Re: Power distribution parts (3.00 / 0) (#3)
by Jerry on Mon Oct 26, 2009 at 04:07:44 PM MST

Hi Tom.

Thats not what I see when I try to get that picture to post. That pictures # does not even show up on the insert thing.

And why has this insert picture thing been removed from responces.

This new system has totaly screwed up my picture posting abilities.

The previus system was working great for me. I know its not my board and computer GURUs have there reasons for making changes but now I get more frustrations than any thing else.

I feel like my hands are tied and it takes me a hr just to do something simple like posting a picture.

Before I could go out to the shop take a picture load it in my computer and the post it in a new post or a responce or where ever but that don't work any more.

I just loaded some pictures here in my files and now I can't post them.

I'm not computer savy. But before I could just take an asprin. Now I think I'll have to go to med school before I can take that same asprin.

OK Tom give me some guidence here. Thanks

Jerry

Airheads Page

[ Parent ]

Re: Power distribution parts (3.00 / 0) (#5)
by TomW on Mon Oct 26, 2009 at 04:28:14 PM MST

Jerry;

Sorry, nothing I can do. It is solidly broken and ADMIN has not even been around for 3 weeks so I don't know what to say other than it apparently is not important. enough to get any attention. Seems some folks may have forgotten that this board is a main source of their fame and neglecting it like this may not be wise.

Frankly I have given up trying to get things moving.

It is not a the source for my livelyhood so ..

Tom

Ignarus can exsisto rememdium. Sardus est forever

[ Parent ]

Re: Power distrobution parts (3.00 / 0) (#6)
by dnix71 on Mon Oct 26, 2009 at 05:08:55 PM MST

You pix properties also show as mostly 929x929 pixels. That's way over the limit (640x480 I think).

Maybe if you resized them and reuploaded them they would display.

Re: Power distrobution parts (3.00 / 0) (#7)
by ghurd on Mon Oct 26, 2009 at 06:26:30 PM MST

I don't get it.
I could see all 4 earlier. Nothing now.
G-

[ Parent ]

Re: Power distrobution parts (3.00 / 0) (#8)
by TomW on Mon Oct 26, 2009 at 06:39:37 PM MST

Jerry said he deleted them. Pooph. Gone.

I still see them but likely they are just cached in Firefox.

Tom

Ignarus can exsisto rememdium. Sardus est forever

[ Parent ]

Re: Power distrobution parts (3.00 / 0) (#10)
by ghurd on Mon Oct 26, 2009 at 07:07:56 PM MST

Yup.
I am using Firefox.
I hit refresh, and then the pics went pooph.
G-

[ Parent ]

Re: Power distrobution parts (3.00 / 0) (#9)
by kurt on Mon Oct 26, 2009 at 06:56:38 PM MST

Jerry please reupload the 4 files that originally appeared in this story to "your photo uploads" and then post a comment here telling me you have done so and i will reinsert them into your story for you. please resize them to 640 x 480 pixels the file names were
Cabinets_442.jpg

Cabinets_446.jpg

Cabinets_441.jpg

Cabinets_444.jpg

i am sorry you are finding using the board so difficult i had just addressed this very issue with admin in an email just yesterday after he got back from his business trip that it was and will continue to effect allot of users until he gets it fixed. there are allot of things around here that need to be fixed i have a hit list as long as my arm...........

http://www.reresource.org/

IRC

Re: Power distrobution parts (3.00 / 0) (#11)
by Jerry on Tue Oct 27, 2009 at 11:06:14 AM MST

Hi Kurt.

I reloaded them and they are back now. I did not resize them cause they are allready 640X480 and well under 150,000 bytes.

I don't know how to make them any smaller then that.

Hopefully time will work out the bugs till the next big change?

Jerry

Airheads Page

[ Parent ]

Re: Power distrobution parts (3.00 / 0) (#12)
by kurt on Tue Oct 27, 2009 at 02:39:12 PM MST

OK good pics look fine size wise thank you

Kurt

http://www.reresource.org/

IRC
[ Parent ]

Power distrobution parts | 11 comments (11 topical)

Menu

� create account
� How to use the board
� FAQs
� search the board
� Google search the board

Login

Make a new account

Username:

Password:

Total Views

��66 Scoop users have viewed this posting.

Related Links

� Also by Jerry

You must be a registered user to post here. It's easy and free, and the link is on the upper right side of your page.
All trademarks and copyrights on this page are owned by their respective companies. Postings are owned by the poster, but may be deleted or moved at the ADMIN's sole discretion. The Rest � 2009 Forcefield.
You can Email the board ADMIN here. PLEASE include the username you signed up with!