1) Re: New board software.. etc .. suggestion [3.00 / 0] Replies: 1
posted by BruceDownunder on 03/09/2010 09:25:35 PM MST
attached to New board software.. etc .. suggestion

2) Re: the new Exmork [3.00 / 0] Replies: 1
posted by BruceDownunder on 02/17/2010 07:18:02 AM MST
attached to the new Exmork

3) Re: the new Exmork [3.00 / 0] Replies: 1
posted by BruceDownunder on 02/16/2010 08:39:24 AM MST
attached to the new Exmork

4) Re: the new Exmork [3.00 / 0] Replies: 0
posted by BruceDownunder on 02/15/2010 11:53:24 PM MST
attached to the new Exmork

5) Re: Raising my first 10 foot turbine [3.00 / 0] Replies: 1
posted by BruceDownunder on 02/15/2010 08:35:12 PM MST
attached to Raising my first 10 foot turbine

6) Re: Exmork wind gennie testpole [3.00 / 0] Replies: 0
posted by BruceDownunder on 02/15/2010 02:15:37 PM MST
attached to Exmork wind gennie testpole

7) Re: too late ,,,posting lost [3.00 / 0] Replies: 1
posted by BruceDownunder on 02/12/2010 03:39:12 PM MST
attached to too late ,,,posting lost

8) Re: turbine rocking [3.00 / 0] Replies: 0
posted by BruceDownunder on 02/12/2010 02:05:49 PM MST
attached to turbine rocking

9) Re: turbine rocking [3.00 / 0] Replies: 1
posted by BruceDownunder on 02/10/2010 01:47:45 PM MST
attached to turbine rocking

10) Re: More progress. [3.00 / 0] Replies: 0
posted by BruceDownunder on 11/23/2009 11:42:38 PM MST
attached to More progress.

11) Re: This upgrade thing is bad today [3.00 / 0] Replies: 0
posted by BruceDownunder on 11/20/2009 03:55:37 PM MST
attached to This upgrade thing is bad today

12) Re: truck alt [3.00 / 0] Replies: 0
posted by BruceDownunder on 11/20/2009 03:45:35 PM MST
attached to truck alt

13) Re: New 10' Homebrew Turbine Flying! [3.00 / 0] Replies: 0
posted by BruceDownunder on 07/12/2009 04:08:58 PM MST
attached to New 10' Homebrew Turbine Flying!

14) Re: turnbuckles, do and dont's [3.00 / 0] Replies: 1
posted by BruceDownunder on 05/30/2009 04:01:53 PM MST
attached to turnbuckles, do and dont's

15) Re: APC Smart-UPS 1250 cold start [3.00 / 0] Replies: 1
posted by BruceDownunder on 04/20/2009 03:30:48 PM MST
attached to APC Smart-UPS 1250 cold start

16) Re: Yaw bearing tower stub question. [3.00 / 0] Replies: 0
posted by BruceDownunder on 04/20/2009 12:11:22 AM MST
attached to Yaw bearing tower stub question.

17) Re: I heard the cable go SNAP... [3.00 / 0] Replies: 1
posted by BruceDownunder on 04/20/2009 12:02:11 AM MST
attached to I heard the cable go SNAP...

18) Re: The truth. Can you handle it? [3.00 / 0] Replies: 1
posted by BruceDownunder on 04/19/2009 11:49:13 PM MST
attached to The truth. Can you handle it?

19) Re: Yaw bearing tower stub question. [3.00 / 0] Replies: 0
posted by BruceDownunder on 04/19/2009 11:28:01 PM MST
attached to Yaw bearing tower stub question.

20) Re: 10' axial flux home made windmill -update- [3.00 / 0] Replies: 0
posted by BruceDownunder on 04/06/2009 03:45:33 PM MST
attached to 10' axial flux home made windmill -update-

21) Re: Shunt not halting alternator [3.00 / 0] Replies: 1
posted by BruceDownunder on 04/05/2009 03:44:47 PM MST
attached to Shunt not halting alternator

22) Re: Made a very good decision! [3.00 / 0] Replies: 1
posted by BruceDownunder on 04/04/2009 04:32:26 PM MST
attached to Made a very good decision!

23) Re: Conversion flys again [3.00 / 0] Replies: 0
posted by BruceDownunder on 04/04/2009 04:24:08 PM MST
attached to Conversion flys again

24) Re: thebackshed temporarily offline. [3.00 / 0] Replies: 0
posted by BruceDownunder on 03/20/2009 02:20:18 PM MST
attached to thebackshed is back online!!

25) Re: turbine back down on the ground [3.00 / 0] Replies: 0
posted by BruceDownunder on 03/13/2009 03:41:13 PM MST
attached to turbine back down on the ground

26) Re: solar panels credits in victoria,australia [3.00 / 0] Replies: 1
posted by BruceDownunder on 02/24/2009 02:46:03 PM MST
attached to solar panels credits in victoria,australia

27) Re: solar panels credits in victoria,australia [3.00 / 0] Replies: 1
posted by BruceDownunder on 02/23/2009 02:10:32 PM MST
attached to solar panels credits in victoria,australia

28) Re: Metal Work finally underway [3.00 / 0] Replies: 0
posted by BruceDownunder on 02/17/2009 01:49:53 PM MST
attached to Metal Work finally underway

29) Re: 2HP Motor for conversion or too small [3.00 / 0] Replies: 0
posted by BruceDownunder on 11/23/2008 01:50:44 PM MST
attached to 2HP Motor for conversion or too small

30) Re: tracker specifications engineer approved [3.00 / 0] Replies: 0
posted by BruceDownunder on 10/30/2008 09:34:34 PM MST
attached to tracker specifications engineer approved