1) Re: Outer and Inner ring of Magnets [3.00 / 0] Replies: 1
posted by Flux on 08/21/2008 01:04:56 AM MST
attached to Outer and Inner ring of Magnets

2) Re: Low power output, 24 pole 3 phase alternator w [3.00 / 0] Replies: 1
posted by Flux on 08/20/2008 02:27:15 PM MST
attached to Low power output, 24 pole 3 phase alternator

3) Re: Low power output, 24 pole 3 phase alternator w [3.00 / 0] Replies: 1
posted by Flux on 08/20/2008 01:13:58 PM MST
attached to Low power output, 24 pole 3 phase alternator

4) Re: Outer and Inner ring of Magnets [3.00 / 0] Replies: 1
posted by Flux on 08/20/2008 12:54:56 PM MST
attached to Outer and Inner ring of Magnets

5) Re: Outer and Inner ring of Magnets [3.00 / 0] Replies: 1
posted by Flux on 08/20/2008 11:21:49 AM MST
attached to Outer and Inner ring of Magnets

6) Re: hydro plant project question [3.00 / 0] Replies: 0
posted by Flux on 08/19/2008 11:14:54 AM MST
attached to hydro plant project question

7) Re: My first DIY solar panel [3.00 / 0] Replies: 1
posted by Flux on 08/19/2008 01:35:49 AM MST
attached to My first DIY solar panel

8) Re: Your Grandfather's Micro-Hydro [3.00 / 0] Replies: 0
posted by Flux on 08/19/2008 01:26:52 AM MST
attached to Your Grandfather's Micro-Hydro

9) Re: Stupid Furling Question [3.00 / 0] Replies: 0
posted by Flux on 08/19/2008 12:46:22 AM MST
attached to Stupid Furling Question

10) Re: hydro plant project question [3.00 / 0] Replies: 0
posted by Flux on 08/18/2008 01:28:30 PM MST
attached to hydro plant project question

11) Re: Inverter as dump load [3.00 / 0] Replies: 0
posted by Flux on 08/18/2008 10:46:45 AM MST
attached to Inverter as dump load

12) Re: Problem with inverter [3.00 / 0] Replies: 0
posted by Flux on 08/18/2008 09:22:38 AM MST
attached to Problem with inverter

13) Re: Inverter as dump load [3.00 / 0] Replies: 0
posted by Flux on 08/18/2008 09:18:26 AM MST
attached to Inverter as dump load

14) Re: burn up [3.00 / 0] Replies: 0
posted by Flux on 08/18/2008 07:59:35 AM MST
attached to burn up

15) Re: 1.5KW at ground level with chainsaw built blad [3.00 / 0] Replies: 1
posted by Flux on 08/18/2008 03:06:57 AM MST
attached to 1.5KW at ground level with chainsaw built blades.

16) Re: Start of my first turbine. [3.00 / 0] Replies: 0
posted by Flux on 08/18/2008 01:34:47 AM MST
attached to Start of my first turbine.

17) Re: My Mag Setting Tool [3.00 / 0] Replies: 0
posted by Flux on 08/18/2008 01:33:06 AM MST
attached to My Mag Setting Tool

18) Re: burn up [3.00 / 0] Replies: 1
posted by Flux on 08/18/2008 01:28:53 AM MST
attached to burn up

19) Re: kollmogen 24 volt brushless 450 watt as 3 phas [3.00 / 0] Replies: 0
posted by Flux on 08/17/2008 03:34:54 PM MST
attached to kollmogen 24 volt brushless 450 watt as 3 phase generator

20) Re: burn up [3.00 / 0] Replies: 1
posted by Flux on 08/17/2008 03:30:28 PM MST
attached to burn up

21) Re: burn up [3.00 / 0] Replies: 1
posted by Flux on 08/17/2008 12:56:06 PM MST
attached to burn up

22) Re: power ? [3.00 / 0] Replies: 1
posted by Flux on 08/17/2008 12:54:40 AM MST
attached to power ?

23) Re: Telephone wire coils for small wind turbine ? [3.00 / 0] Replies: 0
posted by Flux on 08/16/2008 09:50:37 AM MST
attached to Telephone wire coils for small wind turbine ?

24) Re: magnet rotor [3.00 / 0] Replies: 0
posted by Flux on 08/16/2008 01:34:16 AM MST
attached to magnet rotor

25) Re: Afghan designed permanent magnet alternator [3.00 / 0] Replies: 0
posted by Flux on 08/14/2008 02:09:27 PM MST
attached to Afghan designed permanent magnet alternator

26) Re: Wind Power RPM [3.00 / 0] Replies: 1
posted by Flux on 08/14/2008 07:10:07 AM MST
attached to Wind Power RPM

27) Re: Afghan designed permanent magnet alternator [3.00 / 0] Replies: 1
posted by Flux on 08/14/2008 07:01:55 AM MST
attached to Afghan designed permanent magnet alternator

28) Re: need help [3.00 / 0] Replies: 0
posted by Flux on 08/13/2008 11:40:14 AM MST
attached to need help

29) Re: Battery voltage charge/discharge curves [3.00 / 0] Replies: 0
posted by Flux on 08/13/2008 03:00:25 AM MST
attached to Battery voltage charge/discharge curves

30) Re: need help [3.00 / 0] Replies: 0
posted by Flux on 08/12/2008 11:53:07 PM MST
attached to need help