1) Re: Solar storage tank ,Stainless v.s. Steel [3.00 / 0] Replies: 1
posted by Paulm on 02/16/2006 11:04:00 AM MST
attached to Solar storage tank ,Stainless v.s. Steel

2) Re: Solar storage tank ,Stainless v.s. Steel [3.00 / 0] Replies: 0
posted by Paulm on 02/16/2006 10:39:47 AM MST
attached to Solar storage tank ,Stainless v.s. Steel

3) Re: What's your KWH consumption? [3.00 / 0] Replies: 0
posted by Paulm on 04/29/2005 08:01:36 AM MST
attached to What's your KWH consumption?

4) Re: 90 volt treadmill motor [3.00 / 0] Replies: 1
posted by Paulm on 04/26/2005 09:11:53 AM MST
attached to 90 volt treadmill motor

5) Re: SIze of Cable [3.00 / 0] Replies: 1
posted by Paulm on 04/26/2005 09:08:22 AM MST
attached to SIze of Cable

6) Re: Inverter problem [3.00 / 0] Replies: 1
posted by Paulm on 04/06/2005 08:14:07 AM MST
attached to Inverter problem

7) Re: Inverter fuses [3.00 / 0] Replies: 1
posted by Paulm on 04/05/2005 10:16:56 AM MST
attached to Inverter fuses

8) Re: 90vdc for CFL ?? [3.00 / 0] Replies: 1
posted by Paulm on 02/15/2005 12:01:11 PM MST
attached to 90vdc for CFL ??

9) Re: try that again [3.00 / 0] Replies: 1
posted by Paulm on 02/09/2005 11:42:25 AM MST
attached to Condensation easier than you think.

10) Re: SMASHED cells !! [3.00 / 0] Replies: 0
posted by Paulm on 02/08/2005 01:21:49 PM MST
attached to SMASHED cells !!

11) Re: SMASHED cells !! [3.00 / 0] Replies: 0
posted by Paulm on 02/08/2005 10:57:57 AM MST
attached to SMASHED cells !!

12) Re: Why 36 solar cells in a panel? [3.00 / 0] Replies: 0
posted by Paulm on 01/31/2005 10:36:18 AM MST
attached to Why 36 solar cells in a panel?

13) Re: Treadmill motor tests [3.00 / 0] Replies: 0
posted by Paulm on 01/11/2005 09:18:28 AM MST
attached to Treadmill motor tests

14) Re: Homemade search mode for inverters [3.00 / 0] Replies: 0
posted by Paulm on 01/06/2005 10:38:34 AM MST
attached to Homemade search mode for inverters

15) Re: Discovery Channel [3.00 / 0] Replies: 1
posted by Paulm on 01/06/2005 07:01:27 AM MST
attached to Discovery Channel

16) Re: Alternator power [3.00 / 0] Replies: 1
posted by Paulm on 12/08/2004 10:09:37 AM MST
attached to Alternator power

17) Re: need help to lower r.p.m. on walmart generator [3.00 / 0] Replies: 0
posted by Paulm on 12/03/2004 06:39:59 PM MST
attached to need help to lower r.p.m. on walmart generator

18) Re: Hey Tom w Help please. [3.00 / 0] Replies: 1
posted by Paulm on 12/03/2004 06:01:20 PM MST
attached to Hey Tom w Help please.

19) Re: Hey Tom w Help please. [3.00 / 0] Replies: 2
posted by Paulm on 12/03/2004 07:46:06 AM MST
attached to Hey Tom w Help please.

20) Re: Did I score these used L16s? [3.00 / 0] Replies: 1
posted by Paulm on 12/03/2004 07:19:49 AM MST
attached to Did I score these used L16s?

21) Re: 2 blades vs 4 blades at 48 inches. [3.00 / 0] Replies: 1
posted by Paulm on 11/29/2004 10:19:39 AM MST
attached to 2 blades vs 4 blades at 48 inches.

22) Re: 2 blades vs 4 blades at 48 inches. [3.00 / 0] Replies: 0
posted by Paulm on 11/29/2004 06:57:40 AM MST
attached to 2 blades vs 4 blades at 48 inches.

23) Re: test of picture resizing [3.00 / 0] Replies: 0
posted by Paulm on 11/29/2004 05:06:01 AM MST
attached to test of picture resizing

24) Re: Can two small magnets be one large one? [3.00 / 0] Replies: 1
posted by Paulm on 11/29/2004 04:58:29 AM MST
attached to Can two small magnets be one large one?

25) Re: magnet polarity wrong? [3.00 / 0] Replies: 0
posted by Paulm on 11/23/2004 07:44:32 AM MST
attached to magnet polarity wrong?

26) Re: magnet polarity wrong? [3.00 / 0] Replies: 1
posted by Paulm on 11/23/2004 07:22:31 AM MST
attached to magnet polarity wrong?

27) Re: Wind Turbine - Cheap and simple [3.00 / 0] Replies: 0
posted by Paulm on 11/21/2004 05:10:46 PM MST
attached to Wind Turbine - Cheap and simple

28) Re: Ego-Kart [3.00 / 0] Replies: 0
posted by Paulm on 11/17/2004 08:02:31 AM MST
attached to Ego-Kart

29) Re: 1/4 w windmill [3.00 / 0] Replies: 1
posted by Paulm on 11/12/2004 10:38:03 AM MST
attached to 1/4 w windmill

30) Re: induction motor conversion [3.00 / 0] Replies: 3
posted by Paulm on 11/09/2004 12:33:34 PM MST
attached to induction motor conversion