1) Re: plywood+fiberglass blades [3.00 / 0] Replies: 0
posted by cdog on 05/10/2009 07:37:12 AM MST
attached to plywood+fiberglass blades

2) Re: Yaw bearing tower stub question. [3.00 / 0] Replies: 0
posted by cdog on 04/20/2009 06:32:03 AM MST
attached to Yaw bearing tower stub question.

3) Re: Yaw bearing tower stub question. [3.00 / 0] Replies: 1
posted by cdog on 04/19/2009 08:24:55 PM MST
attached to Yaw bearing tower stub question.

4) Re: Tell me how to buid a simple slipring [3.00 / 0] Replies: 0
posted by cdog on 04/19/2009 08:19:52 PM MST
attached to Tell me how to buid a simple slipring

5) Re: Reccomend multimeter [3.00 / 0] Replies: 0
posted by cdog on 04/14/2009 06:19:16 PM MST
attached to Reccomend multimeter

6) Re: Not sure if I want to buy or build??? [3.00 / 0] Replies: 0
posted by cdog on 03/29/2009 08:20:49 PM MST
attached to Not sure if I want to buy or build???

7) Re: Wind Turbine Shorting Switch [3.00 / 0] Replies: 0
posted by cdog on 03/18/2009 08:51:28 PM MST
attached to Wind Turbine Shorting Switch

8) Re: 10 Foot machine with MPPT [3.00 / 0] Replies: 1
posted by cdog on 03/18/2009 06:03:02 AM MST
attached to 10 Foot machine with MPPT

9) Re: Wind Turbine Shorting Switch [3.00 / 0] Replies: 1
posted by cdog on 03/18/2009 05:58:22 AM MST
attached to Wind Turbine Shorting Switch

10) Re: Wind Turbine Shorting Switch [3.00 / 0] Replies: 1
posted by cdog on 03/16/2009 08:57:56 PM MST
attached to Wind Turbine Shorting Switch

11) Re: 20' Diameter Windmill - Grid Connected [3.00 / 0] Replies: 0
posted by cdog on 03/02/2009 06:27:25 PM MST
attached to 20' Diameter Windmill - Grid Connected

12) Re: chainsaw carving. [3.00 / 0] Replies: 1
posted by cdog on 02/25/2009 11:14:52 PM MST
attached to chainsaw carving.

13) Re: chainsaw carving. [3.00 / 0] Replies: 1
posted by cdog on 02/25/2009 12:35:38 PM MST
attached to chainsaw carving.

14) Re: Magnets [3.00 / 0] Replies: 0
posted by cdog on 02/23/2009 06:36:12 AM MST
attached to Magnets

15) Re: Magnets [3.00 / 0] Replies: 1
posted by cdog on 02/22/2009 03:29:42 PM MST
attached to Magnets

16) Re: 10 Foot machine with MPPT [3.00 / 0] Replies: 0
posted by cdog on 02/10/2009 05:49:57 PM MST
attached to 10 Foot machine with MPPT

17) Re: 10 Foot machine with MPPT [3.00 / 0] Replies: 1
posted by cdog on 02/10/2009 03:46:33 PM MST
attached to 10 Foot machine with MPPT

18) Re: 10 Foot machine with MPPT [3.00 / 0] Replies: 1
posted by cdog on 02/09/2009 09:05:48 PM MST
attached to 10 Foot machine with MPPT

19) Re: 10 Foot machine with MPPT [3.00 / 0] Replies: 1
posted by cdog on 02/09/2009 06:38:43 PM MST
attached to 10 Foot machine with MPPT

20) Re: Safe operating RPM [3.00 / 0] Replies: 1
posted by cdog on 12/27/2008 01:56:43 PM MST
attached to Safe operating RPM

21) Re: Safe operating RPM [3.00 / 0] Replies: 1
posted by cdog on 12/26/2008 07:58:22 AM MST
attached to Safe operating RPM

22) Re: Beware self aligning bearings [3.00 / 0] Replies: 0
posted by cdog on 12/16/2008 09:22:55 AM MST
attached to Beware self aligning bearings

23) Re: 3 min. video carving blades with a chainsaw [3.00 / 0] Replies: 1
posted by cdog on 12/10/2008 02:25:33 PM MST
attached to 3 min. video carving blades with a chainsaw

24) Re: New kind of cogwheel stator [3.00 / 0] Replies: 0
posted by cdog on 11/30/2008 04:32:12 PM MST
attached to New kind of cogwheel stator for axial flux generator

25) Re: 100 A dump controller, Ghurd ? [3.00 / 0] Replies: 1
posted by cdog on 11/19/2008 07:50:08 PM MST
attached to 100 A dump controller, Ghurd ?

26) Re: 100 A dump controller, Ghurd ? [3.00 / 0] Replies: 1
posted by cdog on 11/19/2008 06:52:47 PM MST
attached to 100 A dump controller, Ghurd ?

27) Re: More random thoughts [3.00 / 0] Replies: 0
posted by cdog on 11/10/2008 07:27:57 PM MST
attached to More random thoughts

28) Re: More random thoughts [3.00 / 0] Replies: 1
posted by cdog on 11/10/2008 09:32:15 AM MST
attached to More random thoughts

29) Re: More random thoughts [3.00 / 0] Replies: 0
posted by cdog on 11/09/2008 09:20:35 PM MST
attached to More random thoughts

30) Re: AIR 403, lots of Blade questions [3.00 / 0] Replies: 0
posted by cdog on 11/03/2008 03:10:07 PM MST
attached to AIR 403, lots of Blade questions