This is what I found by chucking it into my drillpress.
Into 440 AH of 12 volt batteries that were @ 11.9 volts:
RPM, Open Volts, Amps
- , 4.63V 0A
- , 7.2V, 0A
- , 13.3V, 2A
- , 18.0V, 3.9A
All in all about the same output curve as a 30 volt Tape Drive Motor [TDM] for the same money but with an open frame motor and that funky worm drive shaft. The TDM seems better suited to outside life and has a standard 5/8 shaft.
I'll be posting the Tape Drive Motor Data I have soon too so keep looking back in.
Cheers.
TomW
