CHECK OUT DIARY, EX.-RATED EOPORNO PXS.
Don't be such a knuckle-head, explanation in diary ☺ ☺ ☺ ☺ ☺
Ok men and girls, ready for my Eoporno photos that were so long awaited for ? ? ? ?
"Eoporno" = Encore Of Projects Of Real Novelty. This project is Excellently Rated.
"State of the art" ? No, just "State of the primitive". But it works, ...... and works better ! Here we go, and savory the view, because they will be removed from the net in short order.
Ok the entire seat pedestal was made out of recycled automotive [Vmob] parts, a window crank was modified to operate the up and down movements of the footrest. A break drum was attached to a pipe to form a short column. All the break linking and parts were retained so that a foot operated emergency level would lock down the drum, this mode is required when the vehicle was travelling. Otherwise we would have turned the vehicle into an amusement park when the seat swivels all around and around as s a corner was turned-What is the name they call them ? "Happy Seats" ? " I hate to be in those, never like that type of thrills, makes me dizzy, never like neither to be in the sky 20,000 feet or more up, hurts my ear drums. And then the emergency break release level, when pulled, will unlock and allow the seat to swivel at leisure. Aside from being made off recycled parts, the main feature of this pedestal is one that allows an infinite position locking since it used break drum and shoes. Most other commercial pedestals at the time were only "Multi positions" locking devices, not able to be locked at any position as user desires.
Please bear in mind that these are old photos printed from the 70's, they are not as clear as they should. I cannot find the photo for the entire seat assembly as completed, at this time. Perhaps later I would find it and post out. The high-back seat itself, was from another car. I also custom-built a sofa from scratch for another van.
Eoporno 3014 G :
If you have a slow connection and have trouble downloading this, it is the same as Eoporno 3014. The difference is, I intentionally left the 3014G at very high definition so that if anyone wishes to enlarge the view and have a closer look, the details are there for it. I also made the other non-G one in warmer colour. This is the bottom view-Notice how two of the studs were left in their original holes and the other two studs were welded off to the side of the drum, this is to provide for a wider stance as compared to using the studs in their totally original spaces. You will also notice that, there are holes on the support pieces [Both left and right lower sides of photo]. These are the holes to allow bolts to go through the flat "Bottom-plate" and be bolted onto the underside of the seat. You can also see the crank mechanism pretty clearly on this one. This is to crank up the footrest if not needed. [See other px].
Eoporno 2177 :
Now the pedestal is right side up, you can see at least one of the studs welded on the side of the drum and believe me, it was difficult for me, have no idea what vehicle that came out of but the steel material of the drum made it somewhat welding-unfriendly, it is a type of some cast iron materials. You will also notice the slight curved "V" on the plate, this is to conform to the shape of the underside of the seat.
Eoporno 3021 :
Drum removed, we can see the break linings inside. We can also clearly see the release lever for the swivel, and can see the through-hole mount for the foot rest.
Eoporno 29294337 :
A more close up look to it all. We can see the rear of the crank how a rod is pushing a level to extend or retract the footrest. Also a piece was added to the rear of the crank gears swing plate to operate the rod. We can also notice the welding quality. One might be very curious as to how the welded spots look the way they look. This is because I welded them up with gas, not electric welding ! If I told anyone what I were attempting to do, they would always say that it could not be done, that the welded spots would break upon loading. But not so, I had my special technique, I managed to triple up the welding without they ran off, just a matter of practicing to control the temperature to the exact degree to avoid the previously welded filler running back off, ye, give it enough heat to weld more filler onto the already welding spots, goinng over it three times. We can also see a part of the van in this px, can we see it ? We see it where ? Also, before you become curious and ask, the center of the flat plate seems to have a pipe of some kinds extending out. Not so, just an illusion. That was a part of the coconut tree in the background.
Eoporno 3036 :
Now we see the footrest itself. It had no rubber matting attached to it as yet in this px. But we can see that the movements up and down of it is linked by a spring, meaning, if someone were to force a foot or so onto the footrest and try to crank it up, no straining will occur. People usually are curious as to what happens if they forced things over limits, don't you find it so ? When we were in electronics business, I found that people liked to try to push down on both the play and rewind, or play and forward buttons simultaneously [Sim4-], just to see what happened. But if anything broke, the dealers were always to be blamed, I know. They would come right back and claimed "Defective Products". Well this is human for you ! ! Never trust what your customer told you, any repair department can also confirm this. Well yes sometimes they admit, and that's what make repairs a bit easier, otherwise the technician will be mislead into the tip of a cow horn !
Also, we always say "Welding" for anything. Actually the type of not deep penetration welding is called "Brazing". Real welding can only occur in arc welds, be it Ac or Dc or gas-arc, etc.
Happy days,
Harrylub.
