Author Topic: For eectrondady  (Read 899 times)

0 Members and 1 Guest are viewing this topic.

Allan

  • Newbie
  • *
  • Posts: 10
  • Country: ca
  • retired machinist
For eectrondady
« on: February 25, 2005, 03:30:18 AM »
   Good evening

   I started out with a six phase machine, the second stator was out 1/2 a coil. It is not yet clear why I was not getting the power that I had expected. Now I rotated the stator back to line up with the other. Amps did increase, it has been unbelievable, no wind for 6 days(its like a vacum here)I happy I don't have solar panels. I find this discussion board rather difficult to communicate direct with individuals only. I will know more after I do more tests in strong winds.

   Allan
« Last Edit: February 25, 2005, 03:30:18 AM by (unknown) »

electrondady1

  • SuperHero Member
  • ******
  • Posts: 3121
  • Country: ca
Re: For eectrondady
« Reply #1 on: February 24, 2005, 09:47:34 PM »
thanks very much for your response allan.this kind of information is hard to come by. i plan on three phase, 12 over 16 but was unshure of what to do with the second stator. i think i should run them parallel. perhaps it might be wise to form a slot at the mounting holes of the second stator for tuning.  please keep posting , thanks.
« Last Edit: February 24, 2005, 09:47:34 PM by electrondady1 »