Bruce,
Got the motor yesterday afternoon, from
what I can figure I should be able to remove that
gear that is on the shaft, as soon as I can find
my allen wrenches, and put a little hand crank in
its place...hook one of my little SLA 6volt batteries
(plug n'play) to the red and black wire
and watch how fast the crank spins...now if I
turn the crank faster than the battery is motoring it,
it will charge the battery.
Taking the end cap off, where the wires are
I'll put a marker on that toothed wheel and
count the revolutions to get the exact ratio.
I believe it to be basically a real nice
little brush type PM motor...a real + !
The gear box and the electronic cap and
toothed stepper or whatever it's called are
in themselves real treasures.
Should be able to get everything set up
and get some real data by this afternoon.
Catch 'ya later....this is what I call
havin fun!
Thanks a lot Bruce!
( :>) Norm.