Well, I'm starting a new genny after flying my 12' for a year or so. It will be 18' diameter 3 phase dual 16" rotors with 20x20 1x2x 3/4 or 1" thick neos. The photo shows my completed 5/8" x 20" stator mold and test coil inlaid and epoxied to a test stator. I've got the 16" x 1/2" rotors and I'll be looking at the neos soon. Like Dan's I also have purchased a trailer hub and spindle rated for a 5-6000 lb axle. I've had no problems with West System Epoxy with no reason to experiment with change. It's pricey and it is great stuff. Initially I plan to pre-heat water. Updates and photos to follow as I go. Dave B.
