Author Topic: To Give away  (Read 1062 times)

0 Members and 1 Guest are viewing this topic.

Devo

  • Full Member
  • ***
  • Posts: 175
To Give away
« on: March 13, 2007, 11:28:02 PM »
I have somewhere between 10 & 20 permanent magnet motors , 130 volt dc 1/12 hp. They run the water dampening system on goss printing presses some still have the gear box.

They make between 1 & 2 amps in a brisk wind with a 4 foot prop.some work some need brushes cleaned some are nfg all have 2 good sized ceramic mags.


These motors are on my trailer headed for the dump this weekend(cleaning the shop making room for bigger wind projects....) if anyone is interested I can post a picture of the lot just pay shipping & there yours...


I live in Canada Near Sarnia in Ontario.


Devin  

« Last Edit: March 13, 2007, 11:28:02 PM by (unknown) »

willib

  • SuperHero Member
  • ******
  • Posts: 2414
  • Country: us
Re: To Give away
« Reply #1 on: March 13, 2007, 06:07:48 PM »
i might like one

just one though , very little space left! lol
« Last Edit: March 13, 2007, 06:07:48 PM by willib »
Carpe Ventum (Seize the Wind)

coldspot

  • Hero Member
  • *****
  • Posts: 843
  • Country: us
Re: To Give away
« Reply #2 on: March 14, 2007, 01:33:09 AM »
Devo-

"is interested I can post a picture of the lot just pay shipping & there yours..."

OK,

How about a few pic's of single ones?

Also a weight of one

And a postal code would be helpful for shipping est.


:)


$0.02

« Last Edit: March 14, 2007, 01:33:09 AM by coldspot »
$0.02

Gordy

  • Full Member
  • ***
  • Posts: 151
Re: To Give away
« Reply #3 on: March 14, 2007, 11:22:06 AM »
Devo,


I would be interested in a few of those. How many depends on shipping costs ;-) I'm in Minnesota USA zip 55358, will there be any problems getting them across the boarder?


Thanks,

Gordy


gordyh at lakedalelink.net

« Last Edit: March 14, 2007, 11:22:06 AM by Gordy »

Devo

  • Full Member
  • ***
  • Posts: 175
Re: To Give away
« Reply #4 on: March 22, 2007, 03:19:58 PM »
Sorry for the Delay there are 7 complete with gear boxes attached 10 pounds each. 5 with gear boxes removed   & a handful of parts motors, not sure how many work ,usually cleaning the brushes is all that's needed.


Right now the lot is in 1 box weighing 102 pounds


Pictures later tonight(kids left the camera on so the batteries are charging) .


Devin

« Last Edit: March 22, 2007, 03:19:58 PM by Devo »