I 'm tearing this unit down one more time for a grinding and painting . Installed just behined the front bumper I takes off at 30 mph and is quiet enough at 75 I don't hear it at all I neeeded higher voltages for the HHO Cell to get the volume up with distilled water . I thought it looked so much like a Vawt you'd get a kick out of scaled down 120 degree blade configuration.
The stator is tapped 6 times at 20 and 30 ohms per . It runs 10 to 75 volts around 1 to 1.3 amps per tap . The taps are rectified and paralleled and series in over battery voltage . The cell is on a lawton pmw at 2. 5 to 4 amps(when it gets hot ) with good volume .
